Blog

See the latest news, innovation updates, trial results, grower stories and more from Agricen.

Biocatalyst Technology Helps 2023 Corn Yield Contest Winners Succeed

April 15, 2024 — Posted By Agricen

More than three dozen farmers in the 2023 National Corn Growers Association (NCGA) Corn Yield Contest used Agricen's biocatalyst technologies in their winning programs. They include four farmers who took top places at the national level and 34 who took top places in their states. 🏆

The winning growers used one or more of the following products in their corn fertility programs: Accomplish MAX, Ensurgo, Extract PBA, Levitate, Maritime, Prologue, Terramar and Titan XC. All of these products are exclusively available from our partner, Loveland Products, through Nutrien Ag Solutions.

Corn Yield Winners

The 2023 national corn yield winners again included Virginia farmer Heath Cutrell, who earned first place in the "Conventional Non-Irrigated" category (396.12 bu/a yield). You can learn more about Heath in our short video, Striving for Record Corn Yields.

Other national winners who used Agricen's technology were:

Maryland farmer Temple Rhodes, winner of the "Conventional Irrigated" category (375.67 bu/a yield)
Ohio's Corey Farrens, winner of the "Conventional Non-Irrigated - Corn Belt States" category (340.46 bu/a yield)
New Jersey's Scott Truszkowski, who earned second place nationally in the "Strip, Min, Mulch, Ridge-Till Non-Irrigated" category (323.75 bu/a yield)

We are proud to be a part of these growers' winning programs and wish them the best of luck as we begin the 2024 growing season.

Learn more about some of the technologies used in the winning programs by downloading the Sustainable Technology Overview.

[Interview] Helping Dry Fertilizer Overcome Cool Weather Challenges

December 13, 2023 — Posted By Agricen

AgriTalk podcast 1200px Ron Calhoun, PhD, Senior Manager for Plant Nutrition at Loveland Products, sat with AgriTalk’s Chip Flory to discuss the challenges that cool weather can bring when growers add dry nutrition to the soil during the fall.

Ron - Loveland Products: As we put our dry fertilizers like MAP, DAP, potash, and MESZ in the fall to get ready for next year, those dry materials need to be mineralized by the microbial communities in the soil for the nutrients in them to be available to our plants. Cool conditions in the fall and spring don't really propel that process forward, so that can limit the efficiency of those products. The mineralization process needs assistance to overcome the depressed microbial activity.

Chip - AgriTalk: Where does that assistance come from? Is it biochemistry?

Ron - Loveland Products: You're exactly right. We have a dry fertilizer enhancement product called Titan XC, and it is using that biochemistry from the soil microbial community to make the nutrition more available. We take that biochemistry and we'll actually sparge it onto the dry fertilizer ahead of time.

That way, when you're putting the treated dry fertilizer out, the biochemistry that would typically be provided by soil microorganisms is already on the fertilizer prills, so that we can start the mineralization process and have the nutrition ready to go when the crop season hits.

Chip - AgriTalk: How effective is Titan XC in boosting fertilizer efficiency?

Ron - Loveland Products: We have probably 300 trials from the last 12 to 15 years, and we're closing in on 100 million acres on which Titan XC-treated fertilizer has been applied. I would say, in general, we're looking at probably around a 15 to 20% improvement in nutrient use efficiency.

Designed for use with dry fertilizers, Titan XC contains concentrated biochemistry to help growers maximize the yield potential of their crops by increasing nutrient availability and uptake. It is compatible with a variety of dry fertilizer blends, including phosphate and potash (P & K) blends, MESZ, MES10, sulfate of potash and ammonium sulfate. Titan XC is available from Nutrien Ag Solutions.

This interview was edited for length and clarity. You can listen to the original interview below or on Agricen's YouTube channel.

Learn more about Titan XC by visiting cropfertility.com or downloading the Titan XC product booklet.

Lifelong Friendship Leads to Advice a Grower Continues to Count On

November 6, 2023 — Posted By Agricen

Jason Jaggers Illinois - Doing More with Less Jason Jaggers is a third-generation corn and soybean farmer in Wyanet, Illinois. When it comes to getting advice from his Nutrien Ag Solutions agronomist, Chad Taylor, he knows he has someone he can count on. Chad is not only his agronomist, but also his childhood friend.

"Chad and I grew up together. Now he's my Nutrien agronomist. If he brings a product to me, he knows it better perform," says Jason. "He's also a grower himself, so he understands that."

Two of the products that Chad has introduced to Jason are Titan XC and Extract PBA. They are biocatalyst technologies that help growers "do more with less" by enhancing nutrient use efficiency.

"As he's brought Titan, Extract and multiple other products to the table, they've all performed very, very well," says Jason.

In the fall, Titan XC on dry fertilizer is a particularly important part of the equation.

"If you're making a fall application of fertilizer, it needs Titan XC," say Chad. "Titan brings multiple levels of benefit...being able to take a grower's fertilizer dollar and increase it by upwards of 20 percent."

On Chad's recommendation, Jason has used Titan XC on his fall dry fertilizer for the past decade.

"We've used it for probably the last 10 years in the fall," says Jason. "We tried it on a couple of farms the first year and instantly saw good results. Now I use it on 100 percent of my acres."

Titan XC fall fertilizer Getting ready to spread Titan XC-treated dry fertilizer.

Extract PBA is another product that Chad commonly recommends for corn and soybean producers. He has seen some outstanding results.

"I had a couple of growers say 'I can't raise beans on this farm.' We started utilizing Extract on the solution for corn years and on the residue for bean years. Now they're like, 'Wow, I never thought I would take 80+ bushel beans off this farm.' It's just been a tremendous turnaround in farm production," explains Chad.

On Jason's farm, Extract PBA is being used as a residue management tool on his corn stubble prior to planting soybeans.

"We're going to apply it on standing corn stalks that are going to go to soybeans next spring just to try to break down the massive amount of residue that we have," Jason says. "It seems that the residue is tying up more and more nutrients, so we're trying to get it to breakdown to get them into the soil profile for next spring."

One of the newer products that Chad is able to bring to the table for his grower customers is Accomplish MAX, which is designed for use with liquid starter fertilizer programs and combines the nutrient availability technology found in products like Titan XC and Extract PBA with a marine-based technology for stress mitigation.

"Everyone who's used it that I've talked to is seeing results. The stress mitigation factor of the kelp extract paired with the Accomplish technology has been a tremendous fit. Now you are getting a healthier, stronger seedling that's encountering less stress— whether it be from cold weather, starter fertilizer salt or salinity within the soil profile," Chad says. "There couldn't be a better coupling of what a new planted seedling needs trying to get up and out of the ground fast and uniform."

You can watch the video below, here or on our YouTube channel, to hear more from Chad and Jason.

Learn more about Accomplish MAX, Extract PBA and Titan XC by downloading the Frequently Asked Questions booklet.

[Interview] Put Your Chips on Titan XC This Fall

October 18, 2023 — Posted By Agricen

Wity-radio-down on farm Agricen's Scott Lay recently spoke with Dennis Michelsen of WITY Radio about using Titan XC on fall-applied dry fertilizer blends.

Dennis - WITY Radio: In the fall season, we always talk about Titan XC. Talk a little bit about how it helps growers get the most out of fall fertilizer applications.

Scott - Agricen: Titan XC is applied on dry phosphorus and potash to help mineralize and break down those fertilizer prills, making them more available for next year's crop.

Dennis - WITY Radio: Ag producers don't want to have an extra trip across that field because that's money that they're spending. Titan XC does not require an extra pass.

Scott - Agricen: Titan XC is applied on the dry fertilizer. So whether the local Nutrien retail facility is applying the dry fertilizer or the farmer himself is applying it, putting on the Titan XC doesn't make that job any more difficult, and it also provides a benefit. In terms of a yield impact, we're looking at about an +11-bushel average yield response in corn and about a +4.2-bushel average response in soybeans. So the economics stack up very favorably.

Dennis - WITY Radio: We're talking more than a 7 to 1 ROI when you add the cost of the product.

Scott - Agricen: That's correct. Farmers are obviously interested in the potential for yield response. But they also ask, "How many additional bushels do I need to produce to pay for that additional input?” In soybeans, a farmer would only need 0.6 additional bushels to pay for Titan XC. In corn, it’s a bushel and a half. Farmers are all riverboat gamblers at heart, and they put their chips behind reasonable propositions. With a high probability of payback, Titan XC is one of them.

Dennis - WITY Radio: Lab tests have shown a 22% increase for the first year use as far as available nutrients in those soils. That's a huge advantage.

Scott - Agricen: It is. If we think about a dry fertilizer prill, we're applying rocks to the surface of the ground, albeit small rocks. So the objective is to mineralize those fertilizer prills into a plant-usable form. If we can increase that rate of mineralization by 22%, that translates to a benefit in next year's crop, and that translates to yield.

Titan XC is available from Nutrien Ag Solutions.

This interview was edited for length and clarity. You can listen to the interview below or on Agricen's YouTube channel.

[Watch] Enhance Dry Fertilizer Efficiency to Maximize Yield & ROI

September 27, 2023 — Posted By Agricen

How can growers enhance the efficiency of their fall-applied dry fertilizer blends to maximize yield and return on investment?

Watch our on-demand webinar, "How to Enhance Dry Fertilizer Efficiency to Maximize Yield & ROI," to hear:

How to enhance the efficiency of your fall dry fertilizer application
What you can do to improve nutrient recovery after applying dry fertilizer blends
How to increase yield and return on investment in any crop production system with Titan XC on your dry fertilizer blend

The nutrients in dry fertilizer prills are not highly available to the crop as applied. To become available for crop use, they must first be converted into a plant-available form.

Titan XC is a fertilizer biocatalyst designed to expedite this process and unlock the potential of dry fertilizer programs. When applied to fall- or spring-applied dry fertilizer blends, Titan XC can expedite nutrient availability and uptake, enhance nutrient use efficiency and improve nutrient recovery from the applied fertilizer and from the soil.

In an analysis of 125 third-party and side-by-side trials conducted over the past decade, the average yield increase gained by treating dry fertilizer blends with Titan XC was +10.9 bu/a in corn (73 trials), +3.9 bu/a in soybeans (30 trials) and +4.0 bu/a in wheat (22 trials) as compared to yields with untreated dry fertilizer.

By giving crops greater access to the nutrition they need, Titan XC can help boost crop yields and increase a grower's return on investment.

Titan XC is exclusively available from Nutrien Ag Solutions.

Watch the webinar today to learn how to maximize dry fertilizer efficiency this fall with Titan XC.

Enhancing Fall Dry Fertilizer Efficiency & Grower ROI with Titan XC

August 24, 2023 — Posted By Agricen

Fall can be a good time to apply dry phosphorus (P) and potassium (K) fertilizers because of lower workloads and drier soils. A fall dry fertilizer application can also increase P and K availability for crops planted in the spring by giving the fertilizer prill more time to undergo natural weathering and breakdown in the soil compared to spring applications.

However, just because you apply 300 pounds of P and K this fall, it doesn’t mean that all 300 pounds will be available to next season's crop. Soil physical, chemical and biological properties combined with weather conditions all play a role in fertilizer availability. Even under the best conditions, an application of dry fertilizer on its own is usually not very efficient. In the first season after application, only about 10-30% of applied P and 20-60% of applied K is typically available for use by the growing crop.

For a higher rate of fertilizer efficiency, Titan XC can be applied to dry fertilizer blends, increasing the efficiency of applied P and K fertilizers by an estimated 30%. This contributes to a number of benefits, including improved plant performance (as seen in the photos below from Dassel, Minnesota), as well as a positive yield response.

In the corn trial below from Ohio, a fall application of Titan XC-treated dry fertilizer led to an average yield increase of +8.3 bushels per acre over 6 replications as compared to untreated dry fertilizer.

In a corn trial from Nutrien Ag Solutions’ Hopkinsville, Kentucky research farm, treating dry fertilizer with Titan XC led to a yield increase of 6 bushels or more per acre compared to untreated fertilizer. This was true whether the fertilizer was applied at the full rate (300 lbs/acres) or the reduced rate (270 lbs/acre). What is most notable here is that there was no real difference in corn yield between the two different rates of untreated fertilizer (270 or 300 lbs/acre).

Sometimes the answer is not more fertilizer, but rather greater efficiency. By employing Titan XC to increase the breakdown or mineralization of the P and K nutrients spread in fall, more will be available to the crop next year when it needs it, which can lead to better yield results.

Learn more about Titan XC by downloading the Titan XC fall fertilizer booklet.

Congratulating the 2022 Corn & Soybean Yield Contest Winners

May 1, 2023 — Posted By Agricen

In the NCGA's 2022 National Corn Yield Contest, nearly three dozen winners used Agricen's biocatalyst technologies in their winning programs. They include four farmers who took top places at the national level and 31 who took top places in their states. 🏆

The winning growers used one or more of the following products in their corn fertility programs: Accomplish MAX, Extract PBA, Levitate, Maritime, Terramar and Titan XC. All of these products are available from our partner, Loveland Products, through Nutrien Ag Solutions.

Corn Yield Winners

National corn yield winners include Virginia farmer Heath Cutrell, who, with a yield of 394.05 bu/acre, earned first place in the "Conventional Non-Irrigated" category. His yield was also the highest overall corn yield in this year's contest. Heath was previously featured in Agricen's Last Stand film.

Other national winners who used Agricen's technology include Chad Henderson of Alabama, who placed second nationally in the "Conventional Irrigated" category with a yield of 333.04 bu/acre, and Temple Rhodes of Maryland, who took third place in the nation in the "Strip, Min, Mulch, Ridge-Till Irrigated" category with a yield of 344.94 bu/acre.

Soybean Yield Winners

Agricen's biocatalyst technologies were also a part of several winning soybean programs. The top place winner of the Pennsylvania Soybean Yield Contest and two first place winners of the Michigan Soybean Association Yield Contest all used at least one of Agricen's technologies in their soybean fertility programs:

A. Dale Herr, Jr., 1st Place, Overall & South Central Region, Pennsylvania - 97.49 bu/acre
Don Stall, 1st Place, Overall & Late-Maturity, Michigan - 98.88 bu/acre
Jim Schaendorf, 1st Place, Mid-Maturity Non-Irrigated, Michigan - 89.40 bu/acre

We are proud to be part of all of these growers' winning programs and wish them the best of luck this season.

Learn more about the technologies used in the winning programs by downloading the Sustainable Technology Overview.

Alabama Grower Sees Impressive Corn Yield Gains in Titan XC Trial

October 25, 2022 — Posted By Agricen

Chad Henderson, an XtremeAg farmer in Madison, Alabama, trialed Titan XC-treated dry fertilizer on his farm in 2022. He saw impressive results in both his irrigated and dryland corn.

"We can't wait to try this again," says Chad. "We had great results with this product."

In the trial, Chad compared his standard strip till fertilizer blend to the same fertilizer blend treated with Titan XC at 1 pint per ton. Both treated and untreated fertilizer blends were applied at 180 pounds per acre. Two different hybrids were in the planter, and each treatment (treated vs untreated dry fertilizer) was replicated 3 times for each hybrid in both irrigated and non-irrigated parts of the field.

In irrigated corn, Chad's average corn yield was 276.7 bu/a with his standard fertilizer blend and 293.8 bu/a with the Titan XC-treated dry fertilizer, for a yield advantage of +17.1 bu/a compared to the check.

TitanXC-irrigated-corn-IL-01

He saw similar results in his dryland corn, where his average corn yield was 89.8 bu/a with his standard fertilizer blend and 106.0 bu/a with the Titan XC-treated dry fertilizer, for a yield advantage of +16.2 bu/a compared to the check.

TitanXC-dryland-corn-IL-02

"It was the same results through irrigated and non-irrigated," says Chad. "We're looking forward to doing some more trials with this. We were really pleased with it."

You can hear about the trials directly from Chad in this video.

Titan XC is an innovative biocatalyst that is formulated for application on dry fertilizers to increase nutrient efficiency and provide a yield response across diverse crops. It contains a range of beneficial biochemistries, including enzymes, that help mineralize the applied nutrients to make them more available for plant uptake and utilization.

Learn more about Titan XC by downloading the Titan XC corn bulletin.

[Watch] How to Make Your Dry Fertilizer Work Harder & Go Farther

October 3, 2022 — Posted By Agricen

How can growers make the most of every nutrient they apply, especially with high fertilizer costs? One way is to focus on improving the efficiency of dry fertilizers that are spread in the fall or spring.

Watch our on-demand webinar, "How to Make Your Dry Fertilizer Work Harder and Go Farther," to learn:

Why the amount of fertilizer you apply doesn't always equate to the amount of fertility available to your crop
How next-generation technology can enhance your fall dry fertilizer program for better nutrient availability and uptake in the spring
How Titan XC can help you get more out of every prill you’ve paid for by giving your crop greater access to applied fertility

Hosted by CropLife and presented by Agricen's Director of Applied Sciences, Dr. Brian Cornelious, the webinar explains how Titan XC can help growers maximize their yield opportunities by improving nutrient availability and uptake from treated dry fertilizers.

Fertilizer prills as applied to the field are not available to the plant or soil until they have gone through a conversion process that transforms them from organic forms into inorganic, plant-available forms. For example, applied phosphorus (P₂0₅) must be converted to the inorganic forms HPO₄ or H₂PO₄ before the crop can use it.

Titan XC expedites this process. As part of the investment in next year’s crop, it helps deliver maximum yield and return on investment by making every Titan XC-treated prill go farther and work harder, including in corn, soybean and cotton crops.

Watch the webinar today to learn how to get the most out of your fall dry fertilizer application.

A Cutting-Edge Technology for Fall Dry Fertilizer

September 13, 2022 — Posted By Agricen

Wity-radio-down on farm With fall fertilizer season approaching, Agricen’s Scott Lay spoke with WITY Radio about using Titan XC to get more efficiency and return on investment out of dry fertilizer applications.

Dennis - WITY Radio: I think Titan XC is going to be a great addition to producers' game plans here in the fall.

Scott - Agricen: Titan XC has been available for about 10 years now. With each successive fall, use increases as folks better understand the benefits of what a fertilizer efficiency technology can provide for their operations.

Dennis - WITY Radio: You guys have a track record now of treating so many acres.

Scott - Agricen: We will treat nearly 10 million acres’ worth of dry fertilizer in the calendar year 2022. In the University of Illinois trials that we’ve conducted since 2011, the average yield response to adding Titan XC to a dry fertilizer program is about 4 bushels per acre of increase in soybeans and nearly 10 bushels per acre of increase in corn. With those types of results, we continue to find new farmers who recognize the value of Titan XC, and we’re happy to provide a cutting edge technology for their operations.

Dennis - WITY Radio: Titan XC is about using your fertilizer input more efficiently. But if you’re using it more efficiently, you might be able to reduce the amount of fertilizer you’re applying without hurting your bottom line.

Scott - Agricen: Imagine you go to the grocery store to purchase orange juice, but all that’s available is oranges. You need to convert the oranges to orange juice. Think about that in terms of dry fertilizer. We’re applying oranges to the field, but what that crop needs is orange juice. Titan XC increases that efficiency—that conversion of dry fertilizer prills to a plant-available form—and it really adds up.

Dennis - WITY Radio: You have done testing to see what the effect of a reduced fertilizer rate is with Titan XC.

Scott - Agricen: In 2017 and 2018, we conducted on-farm trials in Sydney, Illinois, where we reduced the fertilizer rate intentionally by 10 percent and added Titan XC to that reduced-rate application. The average yield response in corn was 7 bushels per acre greater compared to the full rate fertilizer alone. Now, fertilizer lasts in the soil for longer than a year. It doesn’t just simply quit. That next crop year, when soybeans were planted after the corn, there was another 1.2-bushel response on the soybeans without additional fertilizer.

Dennis - WITY Radio: This might be better for your soil health as well.

Scott - Agricen: We’ve tracked a number of different farmers’ fertility tests over the last 17 years in Illinois. Where Titan XC has been employed, the actual P and K levels in the soil are increasing. So there is a positive long-term benefit for the producer and for the environment as well. We are creating a more productive soil environment for that corn or soybean crop to grow.

Titan XC is available from Nutrien Ag Solutions.

This interview was edited for length and clarity. You can listen to the full interview below or on Agricen's YouTube channel.

Learn more about Titan XC by downloading the Titan XC corn and soybean bulletin.

Blog

Subscribe to Email Updates

Sign Up for Agricen’s Blog to stay up to date on the latest news.

[Interview] Protecting Existing Crop Yield Potential from Heat Stress

Enhancing Wheat Performance with TERRAMAR on Your Farm

Enhancing UAN Sidedress Efficiency to Optimize Corn Yield Potential

Corn (101)

TITAN (72)

EXTRACT PBA (66)

Soybeans (57)

Accomplish LM (38)

Dry Fertilizer (36)

Ag Biologicals/Biostimulants (33)

Indiana (26)

ACCOMPLISH MAX (24)

Corporate & Community (19)

Crop Residue (21)

Videos (18)

Wheat (18)

Abiotic stress (18)

Grower Stories (18)

Iowa (17)

TERRAMAR (17)

Illinois (15)

Sustainability (14)

Michigan (13)

Minnesota (11)

Starter/In-Furrow Applications (11)

Guest Blogs (9)

Nebraska (9)

Ohio (9)

Webinars (9)

NCGA (8)

North Carolina (8)

Kentucky (7)

MARITIME (7)